Accurate & Versatile Bevelers for the Pipe Welding Industry

Pipe beveling, also known as pipe cutting and pipe profiling, refers to the mechanical industrial process designed for the specific profile of the pipe. This process forms a 37.5 degree angle for welding between the edge of the end of the pipe and a plane perpendicular to the surface. The use of the bevel is to soften the edge of the pipe piece in order to maintain security and wear resistance to facilitate joining with another piece.

The profile of pipe cutting is organized to maximize the fitting between two parts of the pipe. The complex cut includes straight cuts, miters, saddles and mid-section holes.  The final goal of the cut is to prepare the pipe to join permanently with the help of arc welding.

The Function of Pipe Beveling Machines

The pipe beveling machines perform the cut by using a plasma or oxy-fuel thermal torch. This generates a direct flow of plasma in the jet, which further helps in the process of cutting, spraying or arc waste disposal. Pure oxygen is better than ordinary air because it can reach a much higher temperature. Acetylene is the most commonly used fuel in this process. Although is accompanies certain handling problems, it has the advantage over other fuels due to its high heat output.

The basic procedure of pipe beveling includes:

• Joint Preparation
• Root Weld
• Fill and Cap
• Testing

Pipe Beveler Tools

The tools used in the process of pipe beveling are as follows:

• Pipe Alignment & Reforming Clamps
• Pipe decent & Flange apparatus
• Hoist, Lifts + Cranes
• Generators & illumination

High tech pipe beveling tools are simpler to use compared to grinding tools. These tools help reduce the work load and aggravation associated with the process. Certified pipe tools can enhance productivity on the job site while providing accurate and efficient output.

The pneumatic high powered saws come in handy in various situations, such as in removing boiler panels. With the selection of the appropriate tool the individual work safely. The bolt tools can also convene the requirement of various applications and hold a widespread application in multiple industries. 

Reason for automated pipe beveling 

• Low operating cost, uses mostly industry standard carbide tooling.
• Eliminates ergonomic issues from operator handling hand tools.
• No more dirty operations such as hand grinding or torching.